Hot Dip Galvanizing
Hot dip galvanizing is the process of coating iron or steel with a layer of zinc by immersing the metal in a bath of molten zinc at a temperature of around 450 °C (842 °F). When exposed to the atmosphere, pure zinc reacts with oxygen to from zinc oxide, which further reacts with carbon dioxide to form zinc carbonate, a dull Greg, fairly strong material that stops further corrosion in many circumstance, protecting the steel below from the elements Galvanized steel is widely used in applications where rust resistance is needed and can be identified by the crystallization patterning on the surface.
After shot blasting a 7 tank process is involved: Pickling tank, rising tank, Pre Flux Solution, Drying Furnace, Zinc Bath, Quenching Tank, Cooling and inspection as per IS 2629/4759.
Joist Pole
RSJ Poles are used in electric transmission lines, power sub stations and base frames. Standard Size in mm: 116 x 100, 125 x 70x 152 x 152, 175 x 85.
Earthing Strips
Earthing Strips is a typical way of supplying soil for the different regions, such as agricultural, residential, commercial, etc. Typically our stripes are used to provide a secure surface for critical system activity. To make these strips our specialists use galvanized iron. Standard Size in mm : 25x3, 25x6, 50x6, 75x10 and so on.
Galvanized Products
We provide different galvanizing service based on different types of raw material like pipes, plate, angles, bars, etc… in different length, thickness, we can go galvanizing up to 1200 mm in length and 2000 mm in width.
